Updating Firmware (3.60)

Required Reading

The HENkaku exploit is only compatible with the firmware version 3.60. As a result, lower firmware versions must update using a custom update server in order to use that exploit.

Note that a custom update server can only update your device, not downgrade it. If you are on a firmware version higher than 3.60, you should return to Get Started.

Requirements

• An internet connection on your PS Vita (TV)

Instructions

Section I: Prep Work

1. Launch the Settings application.
2. Navigate to Network > Wi-Fi Settings.
   • Connect to a Wi-Fi network if you have not already done so.
3. Select your current connection.
   • This is signified by a green dot next to the network.
4. Select Advanced Settings.
5. Set DNS Settings to Manual.
6. Set Primary DNS to 212.47.229.76.
7. Leave Secondary DNS blank.
8. Ensure Proxy Server is set to Do Not Use.
9. Return to the main Settings menu.

Section II: Updating to 3.60

1. Navigate to System Update > Update Using Wi-Fi.
2. Ensure the update message 3.60 (変革 Compatible) is displayed.
   • If it displays any other message, stop and figure out what went wrong.
3. Follow the prompts to update your device to 3.60.
   • When the process has completed, your device will reboot automatically.

TIP

Continue to Installing HENkaku