Vita Hacks Guide

Appearance

Installing Ensō (3.65) ​

Required Reading ​

If your device on firmware version 3.65 was unable to downgrade to firmware version 3.60 due to its "factory firmware", you will fortunately still be able to use the more convenience Ensō boot-time exploit.

Unfortunately, you may experience minor software incompatibilities as you will not be able to use any homebrew which is only compatible with 3.60.

Requirements ​

  • An FTP Client such as WinSCP or CyberDuck
    • Alternatively, you can also use the USB transfer feature of VitaShell
  • The latest release of Ensō (3.65)

Instructions ​

Section I - Prep Work ​

  1. Launch the VitaShell application,
  2. Press START to open the VitaShell settings,
  3. Press × on SELECT button to change the mode to FTP,
    • Alternatively, you can leave this setting on USB and transfer all files via a USB cable for the remainder of this guide,
    • Note that the USB transfer mode will start you in the ux0 partition,
    • Additionally, some files will be hidden in USB mode on Windows; you must enable Show hidden files, folders, and drives and disable Hide protected operating system files in the File Explorer options in order to see all files.
  4. Press ○ to close the VitaShell settings.
  5. Press SELECT to enable FTP access on your device.
  6. Open your FTP client on your computer.
  7. Enter the IP Address and Port displayed on your device.
  8. Using your FTP client, navigate to ux0: > data/.
  9. Transfer enso.vpk to the data folder.
  10. Press ○ on your device to close the FTP connection.

Section II - Installing VPK ​

  1. On your device, navigate to ux0: > data/.
  2. Press × on enso.vpk to install the file.
  3. Press × to confirm the install.
  4. Press × to continue the install when you are prompted about extended permissions.
  5. Press △ to open the menu, then select Delete to delete the marked file.
  6. Press × to confirm the deletion.
  7. Close the VitaShell application.

Section III - Installing Ensō ​

  1. Open the Ensō application.
  2. Press ○ to accept the terms.
  3. Press × to install Ensō.
    • When the process has completed, press any button to reboot your device.

TIP

Continue to Finalizing Setup (Legacy)