Finalizing Setup (3.60)

For support in English, ask for help at HENkaku on Discord.

Required Reading

We will now setup applications and plugins such as the following:

  • iTLS Installer (adds TLSv1.2 support in older firmwares for online connection)
  • NoNpDrm (allows for encrypted games and applications to be used)
  • 0syscall6 (allows using games and applications that require higher firmware versions)
  • DownloadEnabler (allows any file type to be downloaded with the browser)
  • shellbat (displays exact battery percentage in the status bar)
  • pngshot (improves the built-in screenshot utility)
  • PSVshell (allows overclocking the PSVita for better performances as well as showing CPU usage and fps counter)

In order to install the necessary .vpk (content package) file on your device, we use the File Transfer Protocol (FTP)Open in new window to copy the files to your device's memory card.

What You Need


Section I - Prep Work

  1. Launch the VitaShell application
  2. Press START to open the VitaShell settings
  3. Press × on "SELECT button" to change the mode to "FTP"
    • You cannot use USB file transfer for this section
  4. Press to close the VitaShell settings
  5. Press SELECT to enable FTP access on your device
  6. Open your FTP client on your computer
  7. Enter the IP Address and Port displayed on your device
  8. Using your FTP client, navigate to ux0:
    • The ux0: partition corresponds to the memory card of your device (on the PS Vita 1000, this partition will always be the external memory card; on the PS Vita 2000 and PS TV, this partition will either be the external memory card if one is inserted, or the built-in memory card otherwise)
    • The ur0: partition corresponds to the internal system memory which is always present on all devices (on the PS Vita 2000 and PS TV, this is not the same as the built-in memory card!)
  9. Delete the tai folder if it exists
  10. Navigate to the data/ folder
  11. Transfer iTLS-Enso.vpk to the data/ folder
  12. Navigate to ur0: -> tai/
  13. Transfer config.txt to the tai/ folder
  • Overwrite (replace) the existing config.txt file
  1. Transfer nonpdrm.skprx to the tai/ folder
  2. Transfer 0syscall6.skprx to the tai/ folder
  3. Transfer download_enabler.suprx to the tai/ folder
  4. Transfer shellbat.suprx to the tai/ folder
  5. Transfer pngshot.suprx to the tai/ folder
  6. Transfer PSVshell.skprx to the tai/ folder
  7. Press on your device to close the FTP connection

Section II - Installing homebrew applications

  1. Launch the VitaShell application
  2. Navigate to ux0: -> data/
  3. Press to open the side menu
  4. Press × on "Mark all"
  5. Press to open the side menu again
  6. Press × on "More"
  7. Press × on "Install all"
  8. Press × to confirm the install
  9. Press × to confirm the install again when prompted

Section III - Installing iTLS

  1. Open the iTLS-Enso application
  2. Press × on "Install the full iTLS package"
    • If not on HENkaku Ensō, select "Install the iTLS compat module (web-browser)" instead
  3. Wait for your device to reboot

Section IV - Blocking Updates

  1. Launch the Settings application
  2. Navigate to System -> Auto-Start Settings
  3. Uncheck the Download Update File for System Sofwtare
  4. Close the Settings application

Section V - PSN Access

  1. Launch the Settings application
  2. Navigate to HENkaku Settings
  3. Check "Enable PSN spoofing"
  4. Check "Enable Version Spoofing"
  5. Navigate to "Spoofed Version"
  6. Enter "3.74" into the box
    • Should a new firmware version be released in the future, you must change the spoofed version to match in order to access PSN
  7. Close the Settings application


It is not recommended to make modifications to your Custom Firmware installation by installing homebrew applications intended for advanced users (such as "Enso EX"). Doing so without fully understanding the system can lead to a BRICK!


For information on replacing your Sony memory card with alternative storage (such as a microSD card or USB drive), check out the YAMT page.


For information on installing CFW to the built-in PSP emulator, check out the Adrenaline page.